Flooring & Coatings Systems
Vetotop UC368

Superior performance, aromatic & flexible waterproof polyurethane flooring membrane

Car park decks.
Food and pharmaceutical industry flooring. Aircraft hangers.
Service centers, workshops.
Fast Download
Technical Data Sheet
download (*.pdf 0.25Mb)
Technical Information
Product Description

Vetotop UC368 is a two component, solvent free aromatic polyurethane intermediate coat and waterproofing membrane. The product needs to be overcoated with Vetotop UC370 or Vetotop UC371 for optimum performance and scratch resistance. The products flexibility enables it to perform in a wide range of flooring applications.

  • 100% reactive solids and solvent-free
  • Two components; does not depend on humidity to cure
  • Low maintenance cost.
  • Hygienic, impervious and easily cleanable.
  • High bond, stronger than concrete cohesive strength.
  • Excellent impact resistance.
  • Achieves high thickness compared to moisture- cured single component PU.
Compiliance Standard

ASTM D 6577-15

BS EN476:2009 as class 1 in flame spread.


Packaging & Coverage


Pack Size

Vetotop UC368

4 or 15 Liter Kits

Vetoprime UP360

4 Liter Kits

Vetoprime EP490

4 Liter Kits



Theoretical Coverage

Vetotop UC368

1.7-2.5 m2 / Liter

Vetoprime UP360

8-10 m2 / Liter

Vetoprime EP490

8-10 m2 / Liter


Shelf Life & Storage

Original sealed kit of Vetotop UC368 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Shelf life & Storage

Original sealed kit of Vetotop UC368 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Surface Preparation

The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc. Laitance and weak surface layer shall be removed using mechanical methods such as grinding or blasting in order to provide a sound well profiled surface. All necessary repairs should be made prior to application by using epoxy mortar from Vetorep ER range. New concrete floors shall be at least 28 day sold with moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).

Additional Information
Health & Sefety

Vetotop UC368 is irritant and harmful therefore avoid direct contact with eyes or skin. It is recommended to use protective gloves and goggles during application. In case of contact with eyes, clean immediately with plenty of clean cold water and seek medical advice.

Ensure adequate ventilation when using product or when using solvent for cleaning purposes and avoid inhalation of vapors. The use of barrier creams provide additional skin protection. In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. If swallowed, seek medical attention immediately - Do not induce vomiting.

Vetonit Solvent XX400 is flammable. Keep away from sources of ignition. No Smoking. In the event of fire extinguish with CO2 or foam. Refer to product(s) MSDS for further information.

More Products from this section
Vetotop CL530

Premixed 2 to 10 mm thick cementitious self leveling underlayment

Vetotop CS535

Premixed 10 to 30 mm thick cementitious screed.

Vetotop CS536

Premixed 30 to 100 mm thick cementitious screed.

Vetotop EC198

Chemical & abrasion resistant anti bacterial wall & floor thin epoxy coating

Vetotop EC493

Solvent based high performance, self priming, thin epoxy topping

view more
Featured Product
Vetotouch TEXTURA

Acrylic polymer modified decorative finish coat applied at thicknesses from 3 to 20 mm

External and internal building facades.
As a finish coat for of EIFS / ETICS systems.
Block walls and concrete surfaces.
On scratch coated overhead surfaces.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map