Flooring & Coatings Systems
Vetotop UC375

UV resistant, gloss finish easy to clean solvent-based polyurethane wall coating

High abrasion resistant walls.
Interior and exterior applications. Institutional and high traffic areas.
Fast Download
Technical Data Sheet
download (*.pdf 0.21Mb)
Technical Information
Product Description

Vetotop UC375 is a clear two component, solvent based UV resistant urethane sealer. It is used as UV resistant sealer over masonry, concrete, gypsum and various decorative finishes. The material has excellent adhesion to minimally profiled concrete. Vetotop UC375 is UV stable for use in exterior applications, cures rapidly and the sealed system   is ideal for all weather exposure. When used as a finish coat, Vetotop UC375 gives a hard, glossy surface that offers excellent stain resistance and easy cleanability. Vetotop UC375 is supplied in a pack size of 4 liters kit consist of Resin & Hardener.


Excellent adhesion.

UV Resistant - does not yellow.

Good chemical resistance.

Durable and low maintenance cost.

Excellent resistance to a wide range of mild chemicals.

Tough with excellent impact and abrasion resistance.


Packaging & Coverage


Pack Size

Vetotop UC375

4 Liter Kits

Vetoseal XX777-25

5 Liter Jerrycan



Theoretical Coverage

Vetotop UC375

2.5 - 5.0 m2 / Liter / coat

Vetoseal XX777-25

4 -10 m2 / Liter / coat

Shelf Life & Storage

Original sealed kits of Vetotop UC375 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Surface Preparation

The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.

Laitance and weak surface layer shall be removed using mechanical methods such as grinding in order to provide a sound well profiled surface. All necessary repairs should be made prior to application.

New concrete shall be at least 28 days old with moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).

Additional Information
Health & Safety

Vetotop UC375 is irritant and harmful therefore avoid direct contact with eyes or skin. It is recommended to use protective gloves and goggles during application. In case of contact with eyes, clean immediately with plenty of clean cold water and seek medical advice.

In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water.   Do not use solvent. If swallowed, seek medical attention immediately - Do not induce vomiting.

Vetotop UC375 and Vetoseal XX777-25 are flammable. Keep away from open flames. Refer to product(s) MSDS for further information.

More Products from this section
Vetotop CL530

Premixed 2 to 10 mm thick cementitious self leveling underlayment

Vetotop CS535

Premixed 10 to 30 mm thick cementitious screed.

Vetotop CS536

Premixed 30 to 100 mm thick cementitious screed.

Vetotop EC198

Water Based Chemical & abrasion resistant anti bacterial wall & floor thin epoxy coating

Vetotop EC493

Solvent based high performance, self priming, thin epoxy topping

view more
Featured Product
Vetoflex PU780

High performance, elastomeric, single component polyurethane sealant
(Formerly known as Saveto PU1)

Primerless sealing pre-cast panel joints and expansion joints
As a general elastic adhesive for materials with dissimilar properties and thermal expansion coefficients
Movement and static joint sealing in various construction industry requirements
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map