Saveto plaster accessories - angle beads
Vetonit PAB500 is a pre-galvanized steel angle bead with extended metal wings. Vetonit PAB500 provides a sharp, straight arris that protects and reinforces vulnerable plaster edges. The expanded metal wings ensure Vetonit PAB500 is firmly embedded in the plaster.
ACI: 524R-08 (Building Code Requirements for Masonry Structures).
Vetonit PAB500 |
Wing Width |
Length (m) |
QTY/Box |
Vetonit PAB550 |
50 |
3 |
50 |
Vetonit PAB570 |
70 |
3 |
50 |
Application
Fix Vetonit PAB500 by using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center spaces of 600mm.
Vetonit PAB500 may be wire tied to the face of metal lathing backgrounds. Use tinsnips or shears to cut angle beads to the desired size.
When jointing angle beads use a dowel inserted in the nose to ensure continuity and alignment.
To get a sharp neat corner finish, avoid damaging the beads when troweling plaster or render.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Multi-purpose bonding agent & admixture
Multipurpose low viscosity bonding agent & admixture
Polymeric soil stabilizer
Polymeric bonding agent, waterproof mix enhancer & primer
Versatile resin adhesive, cement modifier, bonding agent & sealer
Self smoothening epoxy based floor topping from 0.8 to 2 mm thickness