Primers and Ancillary
Vetograin Range

Hard-wearing silica aggregates to be used in conjunction of Saveto anti-slip flooring system

Workshops, garages, power stations and loading bays.
Heavy duty factories, car park decks and aircraft hangers.
Any flooring were impact resistance is of importance.
Fast Download
Technical Data Sheet
download (*.pdf 0.19Mb)
Technical Information
Product Description

Vetograin is specially formulated anti-slip aggregate designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane. Composed of silica sand, which is very hard, and angular and blocky in shape, this aggregate provides long term durability and excellent slip resistant features.

  • Pre-packed ready for immediate site use.
  • Range to suite wide range of applications
  • Ready to use packing
  • Increase the slip resistance of Industrial flooring and coatings
  • Provides a mechanical key for overlay systems
  • Increase the impact of Industrial flooring & coating
Packaging & Coverage

Vetograin Products are supplied in 25kg Bags

Shelf Life & Storage

Original sealed bag of Vetograin has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Instructions for use

Design Criteria

Slip resistant aggregates can be obtained in a range of sizes from fine through to coarse. The choice of aggregate can depend on the type of coating and also on the degree of slip resistance required. Finer grades of aggregate are conventionally used in thinner coatings, where coarser grades have a tendency to ball up. Coarser grades are more suitable for thicker coatings, where the finer grades would get lost in the coating hence reducing their effectiveness. Coarser grades are generally more suitable for achieving high levels of slip resistance.

The Selected Vetograin aggregates is broadcasted on to the first rolled coat of Saveto resin flooring whilst it is still wet. Sufficient Vetograin anti-slip aggregates should be applied in to completely cover the surface.
When the first coat has dried, the excess aggregate can be removed by brushing or vacuum off the substrate and provided it is still clean and dry can be re-used.
Vetograin should be applied vertically into the resinous flooring to avoid damaging the film continuity of the flooring.

Additional Information
Health & Safety

Vetograin is non-flammable and non-hazardous.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

view more
Featured Product
Vetogrout GA516

Plasticised expanding grout admixture

As an admixture for cementitious grouts where a reduced water/cement ratio and positive expansion is required.Industrial applications where chemical resistance and rapid strength development is required.
Applications include bed grouting, duct grouting, non-shrink infilling and jointing.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Site Map