Primers and Ancillary
Vetonit Solvent XX400

Resin Cleaning & Thinning Solvent

Clean equipment and tools after use or mixing of epoxy and urethane based resins.
Thinning specific epoxy 100% solids products.
Fast Download
Technical Information
Product Description

Vetonit Solvent XX400 is a specially developed solvent blend for use with the epoxy resins is commonly found in all Saveto epoxy products.". Technical Table: remove " Flash point: 33C". Storage & Shelf Life: replace "Original sealed pack of Vetonit Solvent XX400 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 250C." with "Original sealed pack of Vetonit Solvent XX400 has a shelf life of 12 months provided it is stored clear of ground in a dry, well ventilated, and shaded place below 250C

Packaging & Coverage

Vetonit Solvent XX400 is supplied in 5 and 20 Liter pails

Shelf Life & Storage

Original sealed pack of Vetonit Solvent XX400 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 25ºC.

Pale Liquid
Application Information
Instructions for use


For cleaning tools, it is best to pour some Vetonit Solvent XX400 into a container and to clean the implements within this container.
For cleaning substrates, the solvent can be poured directly, or applied by cloth or paper.
For thinning application of Saveto products, please refer to product data sheet for thinner ratio to original material or refer to local Saveto office for information.

For other products strictly follow the product thinning ratios mentioned in technical datasheet.

Additional Information
Health & Safety

Vetonit Solvent XX400 is an industrial grade solvent that should not come into contact with skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well ventilated areas. In case of insufficient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting.
No smoking or naked flames.
Refer to Material Safety Data Sheet for further information.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

view more
Featured Product
Vetonit PSB

Saveto plaster accessories - plaster stop beads 


Stop Beads is an all-purpose square nose plaster stop (casing bead).
As a plaster stop for finishes and reinforces plaster edges, screed ground.
As exposed trim around doors and windows, as well a base screed.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Site Map