Bahrain
Egypt Jordan Saudi Arabia UAE
EN
EN
Contact news and events About us Home
PRODUCT RANGE
SYSTEM
Selector REFERENCES DOWNLOAD SECTION
Sealants & Joints
Vetoflex PU785

Heavy Duty Epoxy Urethane Joint Sealant

Uses
• Sealing internal floor joints of heavy wheeled, traffic areas and places subjected to heavy industrial use such as factories, food processing areas, warehouses and maintenance facilities.
• Suitable for sawn joints in long strip flooring and other large internal areas like car parking decks, warehouses, etc.
• Ideally suited for stress relieving areas like swimming pools, compression joints and other prolonged water immersion areas
Fast Download
Technical Data Sheet
download (*.pdf 0.16Mb)
Technical Information
Product Description

Vetoflex PU785 is a two component self-leveling epoxy modified polyurethane joint sealant. It can be poured directly into horizontal joints in order to form a tough resilient seal containing a limited degree of flexibility. Vetoflex PU785 can accommodate small amount of movement in expansion and contraction but can take high compressive stresses.

Advantages
  •  Withstands steam cleaning.
  • Excellent adhesion to concrete and asphaltic substrates
  • Extremely resistant to chemicals and hydrocarbon
  • Self-leveling to produce uniform and neat joints.
  • Permanent and uniform water-tight seal
  • Suitable for use in wide joints
  • Good mechanical properties for heavy duty limited movement applications
  • Compatible for use in horizontal areas with a maximum slope gradient of 10%
Compiliance Standard
  • BS 5212: Part 1
  • ASTM C 920, Type M, Grade P Class 12
Packaging & Coverage

4 Liter Kits

Qty (Liters) =( joint: width (mm) x depth (mm) x length)(m))/ 1000

Shelf Life & Storage

Original sealed container of Vetoflex PU785 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.

Application Information
Additional Information
Health & Sefety

Avoid contact with skin or eyes. During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

In case of contact with skin, rinse with water  and  again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

If ingested, obtain medical attention immediately. Do not induce vomiting.

More Products from this section
Vetoflex PBR

Closed cell polyethylene backing rod

Vetoflex PU781

Multi-component polyurethane joint sealant
(Formerly known as Saveto PU2)

Vetoflex PS782

Two-component polysulphide trafficable joint sealant
(Formerly known as Saveto PS2)

Vetoflex PU780

High performance, elastomeric, single component polyurethane sealant
(Formerly known as Saveto PU1)

Vetoflex SS783

High quality elastic one component moisture cure silicone sealant

view more
Featured Product
Vetonit Thick Render

Water Resistant Thick Patch & Repair Premixed Render

Uses
Internal & external plaster on block walls and rough surfaces.
Applied on both vertical and over-head surfaces
On concrete surfaces that are smooth and also precast concrete surfaces with scratch coat applied first.
Plastering to a thickness of 15 mm in a single application.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map
Home
About us
news and events
Contact
DOWNLOAD SECTION
REFERENCES
Copyright ©2015-2016 Saudi Vetonit Co. Ltd. All Rights Reserved.