Flooring & Coatings Systems
Vetotop EL395

Self-smoothening Novaloc epoxy based floor topping from 0.8 to 2mm thickness

Uses
Floor topping for a variety of industrial applications such as: production chemical plants, secondary containment areas, dairies, bottling plants, breweries, pharma plants, etc.
Wet working areas subject to chemical spillage.
Clean rooms and laboratories.
Fast Download
Technical Data Sheet
download (*.pdf 0.24Mb)
Technical Information
Product Description

Vetotop EL395 is a two component high performance self-smoothening Novolac epoxy flooring system that flows in a honey like manner to self-smoothen to a perfect level. Once cured, the product has excellent abrasion and chemical resistance. Vetotop EL395 provides an attractive hard wearing and easily cleanable floor finish. Its use on floors will enhance lighting in the environment due to the product reflective properties.

Advantages

Superior glossy and leveled finish.

High abrasion and impact resistance. Ease of application.

High chemical resistance.

Low maintenance costs.

Hygienic, impervious and easily cleanable.

High bond, stronger than concrete cohesive strength.

Fast Curing.

Compiliance Standard

BS EN476:2009 as class 1 in flame spread.

Packaging & Coverage

Product

Pack Size

Theoretical Coverage

Vetotop EL395

15 Liter Kits

1m2/ liter @1mm

Vetoprime EP491

4 Liter Kits

8m2 / liter

Shelf Life & Storage

Original sealed kits of Vetotop EL395 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Shelf life & Storage

Original sealed kits of Vetotop EL395 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Surface Preparation

The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.

Laitance and weak surface layer shall be removed using mechanical methods such as grinding or blasting in order to provide a sound well profiled surface. All necessary repairs should be made prior to application by using epoxy mortar from Vetorep ER range.

New concrete floors shall be at least 28 days old with moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).

 

Additional Information
Health & Sefety

Vetotop EL395, Vetoprime EP491, and Vetonit Solvent XX400 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective   clothing,   gloves,   and   eye   protection.   If working in confined areas, suitable respiratory protective equipment must be used.

The use of barrier cream provides additional skin protection.

In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. If swallowed, seek medical attention immediately. Do not induce vomiting.

Vetonit Solvent XX400 is flammable. Keep away from sources of ignition. No Smoking. In the event of fire

extinguish with CO₂ or foam.

More Products from this section
Vetotop CL530

Premixed 2 to 10 mm thick cementitious self leveling underlayment

Vetotop CS535

Premixed 10 to 30 mm thick cementitious screed.

Vetotop CS536

Premixed 30 to 100 mm thick cementitious screed.

Vetotop EC198

Chemical & abrasion resistant anti bacterial wall & floor thin epoxy coating

Vetotop EC493

Solvent based high performance, self priming, thin epoxy topping

view more
Featured Product
Vetofiber GFR

Glass fiber reinforcement meshes designed for use with coatings, sealants and tile setting products.

Uses
Reinforcement of cementitious and resinous coatings.
Strengthening of corners and sharp angle sections.
Reinforce against crack formation in coatings and waterproofing membranes.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map