High Quality Monofilament Polypropylene Fibers
Saveto PP Fiber is a high performance monofilament Polypropylene fiber developed reduce microplastic shrinkage and cracking during the curing of concrete and Improves the strength characteristics of cohesiveness and surface quality of concrete, its avaible in 6mm length of Plaster and renders and 12mm length for concrete .Its suitable for hot and tropical climate Fiber is also used in mixtures to increase the strength in bending and tension and reducing the risk of delamination. Fiber is an economical and quality alternative to steel mesh controls the formation of cracks.
Saveto PP fiber complies with ASTM 1116
Saveto PP Fiber is supplied in 0.9kg Bage
Original sealed bag of Saveto PP Fiber has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.
Slip Saveto PP Fibers is a high quality, 100% virgin polypropylene, in compliance with ASTM1116 used a secondary reinforcement and reduces the occurrence of plastic settlement cracking whilst enhancing the surface properties and durability, abrasion and integrity. It replaces wire mesh reinforcement
Concrete Placing Standard placement procedures for concrete should be followed. Due to fiber efficiency, minor mix design modifications may be required depending on the application. Saveto PP Fiber is added to the mixer before, during or after batching the other concrete materials. Mixing time of at least 5 minutes at mixing speed is required as specified in ASTM C 94.
Saveto PP fiber is ready to use at 0.900 kg/m3 of the mortar or concrete. For Shotcrete works refer to Saveto Technical Department for specific dosage recommendations.
Overdosing of Saveto PP fibers will generally produce a reduction in workability and an increase in the cohesiveness of the mix.
Saveto PP Fiber is compatible with all commonly used concrete admixtures and performance enhancing chemicals.
Saveto PP Fiber is non-flammable and non-hazardous.
Refer to Material Safety Data Sheet for further information.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Multi-purpose bonding agent & admixture
Multipurpose low viscosity bonding agent & admixture
Polymeric soil stabilizer
Polymeric bonding agent, waterproof mix enhancer & primer
Versatile resin adhesive, cement modifier, bonding agent & sealer
High quality elastic one component moisture cure silicone sealant