Wall & Facade Systems
Vetotouch Brillante

Exterior decorative textured render

Ideal for application to most building where a simulated stone effect finish is required.
As a finish coat for of EIFS / ETICS systems
On plastered, fair faced concrete surfaces.
Fast Download
Technical Data Sheet
download (*.pdf 0.21Mb)
Decorative Coating Brochure
download (*.pdf 2.78Mb)
External Thermal Insulation Composite System - ETICS
download (*.pdf 8.19Mb)
Technical Information
Product Description

Vetotouch Brillante is a decorative and protective cement based coat composed of hydraulic binders, selected granules of granite, aggregates and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on site, which requires only addition of clean water to produce cohesive mortar. Vetotouch Brillante is a high quality product contains shrinkage control additive with Ultra Violet (UV) resistant and color retention and adhesion on various surfaces. It is also ideal for use as patching, repairing material and to have attractive decorative design . Vetotouch Brillante available in Vetonit Standard Colors. 

  • Factory controlled pre-blend ensures consistent high quality
  • Requires only addition of water on –site at the time of usage.
  • Provides a variety of finishes using various colors and marble chip types..
  • Improved workability and curing
  • Easy application with uniform work flow enables high productivity and superior finishing.
  • Resists alkalinity and atmospheric pollutants and the harsh climatic conditions
  • Strong adhesion on variety of substrates.
  • Internal and external applications.
  • Weather resistant.
  • UV stable pigment provides resistance to fading and eliminates need for additional paint
  • Suitable for humid and dry condition.
Compiliance Standard
  • EN 998:2010
  • EN 926:2011
  • EN 13914:2005
  • EN 1015:2000
Packaging & Coverage

Vetotouch Brillante is supplied in 25 Kg Bag, Coverage : 1.5 Kg / m2 / 1 mm Thickness 

Shelf Life & Storage

Original sealed bags of Vetotouch Brillante has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.

Colored Powder with marble effect
Application Information
Instructions for use


Vetotouch Brillante can be applied in a single layer (3 - 6 mm) or multiple layers up to 10 mm on rough or smooth surfaces to desired thickness. For multiple layers application, each layer should not exceed 5 mm.
(Decorative color texture)
Vetotouch Brillante can be applied in one or two layers up to 6 mm/coat.
Apply by hopper Gun or by Terol hand operated machine.
To get effective & water repellent for Vetotouch Brillante, apply Veto seal XX777 by brush or spray machine after three days of curing.
The time available for application and settlement almost an hour (depending on weather condition).
Apply Veto seal XX777 for extra protect against water penetration, chloride ion attack, freeze/thaw cycles, weathering and penetrate all porous materials used in buildings.


Vetotouch Brillante is best cured by spraying water on the surfaces of applied materials every 12 hrs for minimum of 3 days. During hot & dry conditions allow curing for minimum of 5 days. It will help to obtain high mechanical strengths and minimize the risk of surface cracks
Vetotouch Brillante is best cured by spraying water on the surfaces of applied materials every 12 hrs for minimum of 3 days. During hot & dry conditions allow curing for minimum of 5 days. It will help to obtain high mechanical strengths and minimize the risk of surface cracks

Surface Preparation


Add to the mixing container 7-8 liters of water for each 25 kg bag of Vetotouch brillante .
Add the powder to the water and mix with a mechanical plaster mixer or low speed heavy duty electric drill fitted with a suitable paddle for 3-4 minutes, until a uniform, lump free consistency is achieved.

Leave the mixed material to stand for 10 min and briefly remix without addition of water.
Manual mixing is allowed for small batch quantities and mix for approx. 1-2 min or when homogeneous mix is achieved.
Add 0.5 to 1.0 liter of Vetobond AB432 to the mixing water and adjust the water requirement accordingly for each 25 kg adjust the water requirement accordingly for each 25 kg bag. Follow same mixing procedure as described above.
Mixed material must be used within 30-60 minutes.
Do not add water, once the mixed mortar start to harden.

Additional Information
Health & Sefety

Vetotouch Brillante is highly alkaline therefore avoiddirect contact with eyes or skin. It is recommended to use protective gloves and goggles during application. Any skin contact should be wash with soap & water. Incase of eyes irritation, immediately wash with copious amount of clean cold water. Seek medical advise. Vetotouch Brillante is non-flammable.
For further information, please refer to material safety
data sheet.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.


More Products from this section
Cool Plaster

Advanced Modified Cementitious Thermal Insulating Plaster

Masonry Grout Filler

Premixed cementitious masonry grout

Vetoblock Mortar AAC

Adhesive for autoclaved aerated concrete block


Premixed cementitious masonry mortar

Vetotherm FLEX

Cementitious based adhesive and base coat for EIFS / ETICS

view more
Featured Product
Vetofill CG551

Polymer modified anti-microbial cementitious fine tile grout

Filling tile joints virtually all types of tiles up to 10 mm
Health related construction tiling such as kitchens, hospitals, clinics, health centers and food processing plants
Wet areas such as kitchens, bathrooms
Connected products
Vetotouch Repara

Dual component cementitious coating and color nuetralizer for...

Vetotouch TYROLEAN

Exterior decorative textured render

Vetotouch TEXTURA

Acrylic polymer modified decorative finish coat applied at...

Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map